Southbend 17" Turn-nado Geared Head Tool Room Engine Lathe Swing Over Bed And Saddle Wings ----------- 17-1/8" Swing Over Cross Slide -------------------- 10-1/2" Swing Over Cross Slide Without Chip Guard 11-1/4" Distance Between Centers ------------------ 80" Spindle Nose ------------------------------ D1-8 Camlock Headstock Spindle Taper ------------------- No. 5 Morse Spindle Bore ------------------------------ 2-9/16" Spindle Speeds ------- ( 18 ) ------------- 30 To 1580 Rpm Main Drive Motor -------------------------- 7.5 / 3.75 Hp 3/60 Threading Capacity: With 20 Tooth Gear -- ( 60 ) ------------ 2-3/4 To 160 Tpi With 40 Tooth Gear -- ( 10 Extra Threads ) 1-3/8 To 2-1/2 Tpi Longitudinal Feeds ---- ( 60 ) ------------ 0.0021 To .1242 Ipr Power Cross Feeds ----- ( 60 ) ------------ 0.0011 To 0.0678 Tailstock Spindle ------------------------- No. 4 Morse Equipped with Dorian quick change Tool Post 15" 3 jaw chuck Tailstock Chuck Guard Work Light Flame Hardened Ways Approximate Dimensions: 136"(LR) X 37"(FB) X 53"(H) Approximate Weight: 5,000 Lbs.