Used 2013 OKUMA MILLAC 1000000000000VH | Machining Centers, Horizontal

2013 Okuma Model Millac 1000VH 5 Axis Machining Center

X-Axis: 72.83"
Y-Axis: 51.18"
Z-Axis: 39.37"
Spindle nose to pallet top (spindle vertical):-3.94 to 35.43"
Spindle center to pallet center (spindle vertical):-22.83 to 50"
Spindle center to pallet top (spindle horizontal):5.91 to 45.28"
Spindle nose to pallet center (spindle horizontal):-32.68 to 40.16"
Max work dimension: 39.37" x 39.37"
Max load capacity: 4,400 Lbs
Indexing angle (any NC orientation):0.001
Floor to pallet top: 50.79"
Spindle speed: 100~10,000 RPM
Spindle taper hole: CAT 50 Big+
Spindle swivel angle: 150 degrees
Indexing angle (NC arbitrary indexing):0.001
2- pallet rotary-shuttle automatic pallet changer
Full 5 Axis Simultaneous Capability
OSP-P300M Control
10,000 RPM Spindle Option
120 ATC
Cat 50 Big Plus Spindle Taper
Custom /walk around platform
B Axis, with .001 Degree Increment
Tool Breakage Detection
Auto Gauging with Renishaw Probe
Super Nurbs (Full 5 Axis Capability)
Inverse Time Feedrate
Spindle Prep for 1,000 PSI Through
MP Systems 1000 PSI Unit
Coolant Level Check
Shower Coolant
Tool Wear Offset (300 Sets)
3D Tool Compensation
3D Circular Interpolation
Slope Machining
Tool Length Compensation
Tool Life Management
Load Monitor
Tech Navi (control vibration/chattering)
Tool Point Control
Chip Conveyor, Lift Up Type Mayfran
Mist Extractor (recommended by Baldor)
Direct Drive Spindle
New Today over US$1.3 Million
This machine is for sale so the owner can purchase a larger machine
2013 build / 2014 Installed - Very Low Hours
Purchased with all available options
Running Hours: 2494
Operating Hour s: 900
Cutting Hours: 590